“三个代表”重要思想是马克思主义政党学说的新发展

“三个代表”重要思想是马克思主义论述的提炼和概括。以江泽民同志为核心的第三代领导集体不断研究新情况,不断总结我党的宝贵经验,提出了新时期党的建设的总目标,制定了一系列加强党的建设的重大举措,开辟了继毛泽东思想、邓小平理论之后马克思主义基本原理与中国实际相结合的又一新境界。     

军事基础课程体系改革与研究

以新时期军事斗争准备为牵引,改革与创新军事基础课程体系,是我院"4+1"模式新型军事人才对军事基础教学与训练的客观要求.通过重点阐述我院围绕加强学员的素质教育,深化军事基础课程体系改革与研究的思路,为新形势下军事基础课程体系深层次的改革与发展,提供了若干参考.     

可压缩流动压力修正方程分析

依据Ｐａｔａｎｋａｒ提出的差分方程稳定性判断的４项基本法则,对可压缩流动的压力修正方程进行了分析,得出压力修正方程系数为正的条件．指出在每一次求解压力修正方程时必须提高解的收敛程度,以保证下一次迭代的差分方程矩阵接近主对角占优．分析了速度离散方程的欠松驰因子对可压缩流压力修正方程的影响．     

基于一种模型的中子星结构

从物态方程出发,利用中子星结构方程计算了中子星的结构。得到了引力质量材M_G=1.27M_θ材,转动惯量I=1.29x10(45)g/cm~2,与观测结果符合较好。     

关于雷达角跟踪性能测试方法的探讨

基于雷达跟踪目标最大角速度和角加速度的定义,分析了用雷达跟踪目标最大角速度和角加速度表征雷达跟踪性能的可行性,并对角误差信号的模拟方法进行了讨论。介绍了一个可以测试幅频特性、暂态特性、雷达跟踪目标最大角速度和角加速度的测试系统设计思想。     

含非线性半群的微分包含

研究了形如X＇（t）∈-Ax（t）＋F（t,x（t））,0≤t≤T,X（0）＝x0的微分包含解的存在的局部性和整体性的结果,并在某种条件下研究了解的稳定性。     

国外铣削刀具磨损量自动检测方法综述

综述了国外现有的铣削刀具磨损量自动检测方法,对比分析了各方法的优缺点及应用范围,并对其在我国军品生产中的应用前景进行了初步分析。     

速率偏频激光陀螺寻北仪中转台测角周期性误差的影响分析

连续旋转式寻北仪以其突出的性能成为当前寻北仪研究的热点,但关于转台误差对连续旋转寻北算法精度影响的分析很少.针对速率偏频激光陀螺寻北仪,研究了转台测角周期性误差对寻北结果的影响.理论分析表明,测角周期性误差的存在会导致寻北结果偏离真实值,必须对其进行建模和补偿以提高寻北精度.对理论分析结果进行了仿真实验和样机寻北实验验...     

Coherent systems based on sequential order statistics

The sequential order statistics (SOS) are a good way to model the lifetimes of the components in a system when the failure of a component at time t affects the performance of the working components at this age t. In this article, we study properties of the lifetimes of the coherent systems obtained using SOS. Specifically, we obtain a mixture representation based on the signature of the system. This representation is used to obtain stochastic comparisons. To get these comparisons, we obtain some ordering properties for the SOS, which in this context represent the lifetimes of k‐out‐of‐n systems. In particular, we show that they are not necessarily hazard rate ordered. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

Periodic review inventory management with contingent use of two freight modes with fixed costs

We study a stochastic inventory model of a firm that periodically orders a product from a make‐to‐order manufacturer. Orders can be shipped by a combination of two freight modes that differ in lead‐times and costs, although orders are not allowed to cross. Placing an order as well as each use of each freight mode has a fixed and a quantity proportional cost. The decision of how to allocate units between the two freight modes utilizes information about demand during the completion of manufacturing. We derive the optimal freight mode allocation policy, and show that the optimal policy for placing orders is not an (s,S) policy in general. We provide tight bounds for the optimal policy that can be calculated by solving single period problems. Our analysis enables insights into the structure of the optimal policy specifying the conditions under which it simplifies to an (s,S) policy. We characterize the best (s,S) policy for our model, and through extensive numerical investigation show that its performance is comparable with the optimal policy in most cases. Our numerical study also sheds light on the benefits of the dual freight model over the single freight models. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011